Vermont Castings KSTDV500(N/P)TSCSB Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 72

background image

20306743

55

KSTDV Series Gas Fireplace

LIMITED LIFETIME WARRANTY POLICY

LIFETIME WARRANTY

The following components are warranted for life to the original owner, subject to proof of purchase: Firebox, Combustion
Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVE YEAR WARRANTY

The following components are warranted

fi

ve (5) years to the original owner, subject of proof of purchase: Ceramic Fiber

Logs.

BASIC WARRANTY

Vermont Castings Group warrants the components and materials in your gas appliance to be free from manufacturing
and material defects for a period of two years from date of installation. After installation, if any of the components man-
ufactured by Vermont Castings Group in the appliance are found to be defective in materials or workmanship, Vermont
Castings Group will, at its option, replace or repair the defective components at no charge to the original owner. Vermont
Castings Group will also pay for reasonable labor costs incurred in replacing or repairing such components for a period
of two years from date of installation. Any products presented for warranty repair must be accompanied by a dated proof
of purchase.
This Limited Lifetime Warranty will be void if the appliance in not installed by a quali

fi

ed installer in accordance with the

installation instructions. The Limited Lifetime Warranty will also be void if the appliance is not operated and maintained
according to the operating instructions supplied with the appliance, and does not extend to (1)

fi

rebox/burner assembly

damage by accident, neglect, misuse, abuse, alterations, negligence of others, including the installation thereof by
unquali

fi

ed installers, (2) the costs of removal, reinstallation or transportation of defective parts on the appliance, or (3)

incidental or consequential damage. All service work must be performed by an authorized service representative.
This warranty is expressly in lieu of other warranties, express or implied, including the warranty of merchantability of

fi

tness for purpose and of all other obligations or liabilities. Vermont Castings Group does not assume for it any other

obligations or liabilities in connection with sale or use of the appliance. It states that do not allow limitations on how long
an implied warranty lasts, or do not allow exclusion of indirect damage, those limitations of exclusions may not apply to
you. You may also have additional rights not covered in the Limited Lifetime Warranty.
Vermont Castings Group reserves the right to investigate any and all the claims against the Limited Lifetime Warranty
and decide upon method of settlement.

IF WARRANTY SERVICE IS NEEDED...

1. Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial number of your

Vermont Castings Group product.

2. DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

«
...
53
54
55
56
57
...
»

Содержание KSTDV500(N/P)TSCSB









































































Отзывы:

Нет отзывов

Похожие инструкции для KSTDV500(N/P)TSCSB

Бренд: NANO Страницы: 52

Бренд: Valor Страницы: 3

Бренд: Pacific energy Страницы: 24

Бренд: Jensen Страницы: 48

Бренд: EdilKamin Страницы: 32

Wellington Surround

Бренд: Valor Fires Страницы: 8

Бренд: Costway Страницы: 22

Бренд: Monessen Hearth Страницы: 32

Бренд: Clifton Страницы: 50

Бренд: Heat & Glo Страницы: 57

Venice WLVF-1/0343

Бренд: Frigidaire Страницы: 10

Vienna VWF-1 0305

Бренд: Frigidaire Страницы: 12

Бренд: Frigidaire Страницы: 10

Ottawa FORF-1/0340

Бренд: Frigidaire Страницы: 8

Бренд: Frigidaire Страницы: 8

Бренд: GlammFire Страницы: 24

Бренд: Heat&Glo Страницы: 9

Бренд: Heat&Glo Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды