20306743
39
KSTDV Series Gas Fireplace
TOUCH SCREEN REMOTE CONTROL OPERATION
THERMO, LIGHT, FAN, AUX) are pressed and
fl
ashing.
1. Press the ON/up button to turn
on the
fi
replace. The
fl
ame icon
on the LCD displays High.
2. Press the OFF/down button to
decrease the
fl
ame height and
turn off the
fi
replace. When the
OFF/down button is pressed
for three times, the
fl
ame icon
changes form High to Medium,
to Low, then to Off.
3. If the OFF button is held for
more than 3 seconds at any
fl
ame height, the
fi
replace will
be turned off and the
fl
ame icon
disappears.
4. Sliding up and down on the arrow buttons can also
turn on or turn off the
fi
replace.
5. If the
fi
replace is shut off using the above methods in 3
and 4, all the settings will be remembered and will be
resumed next time the
fi
replace is turned on (Memory
Off).
Timer Mode
Figure 54
Press the TIMER button to enter
timer mode. The
fi
replace will stay
on for a period of time as speci
fi
ed
by the timer and then be shut off
by the transmitter when the timer
counts down to zero.
1. When the TIMER button is
pressed, the Set Time appears
in the frame of the button and
fl
ashes.
2. Use ON/up and OFF/down to in-
crease or decrease the Set Time
in 15 min. increments, between
0:00 to 6:00. Sliding up and down on the arrow buttons
will increase or decrease the Set Time in 1 hour incre-
ments.
3. Push the TIMER button again to con
fi
rm the Set Time,
the transmitter sends an ON signal to turn on the
fi
re-
place.
4. The
fl
ashing stops and the ON/up and OFF/down but-
tons become
fl
ame height controller again. The
fl
ame
height will then stay as set up by the ON/up and OFF/
down buttons.
5. The TIMER button can be used when the transmitter
is in Manual Mode or in Thermostat Mode. In both
modes, the
fi
replace will be shut down completely
when the timer counts down to zero.
6. To exit Timer Mode:
a. Push and hold the TIMER button for 3 seconds Or
b. Use the OFF/down buttons to decrease the Set
Time to zero Or
c. Slide down on the arrow buttons to exit TIMER
mode and shut off the
fi
replace.
Thermostat Mode
Figure 55
Press the THERMO button to set
the transmitter in thermostat mode.
The transmitter will automatical-
ly turn on the
fi
replace when the
room temperature is below the set
temperature and turn off the appli-
ance when the room temperature
is above the set temperature with-
in one degree.
1. When the THERMO button is
pressed, the Set temperature
appears in the frame of the but-
ton and
fl
ashes.
2. Use ON/up and OFF/down to increase or decrease
the Set temperature in 1 degree increments, between
45 degrees and 90 degrees. Slide up and down on the
arrow buttons will increase or decrease the Set Tem-
perature in 10 degrees increments.
3. Press the THERMO button again to con
fi
rm the Set
Temperature. The transmitter will send out an On
signal or an Off signal depending on the relationship
between the Set temperature and the Room tempera-
ture.
4. The
fl
ashing stops and the ON/up and OFF/down but-
tons become
fl
ame height controller again. The
fl
ame
height will then stay as set up by the ON/up and OFF/
down buttons.
5. To exit Thermostat Mode:
a. push and hold the THERMO buttons for 3 sec-
onds or
b. slide down on the arrow buttons to exit Thermo-
stat mode and shut off the
fi
replace.
Smart Mode
®
Thermostat
Option for Thermostat
Mode
Figure 56
Press and hold the THER-
MO button and the ON/UP
button at the same time for
3 seconds to toggle between
Smart Mode
®
thermostat
and the regular Thermo-
stat Mode. The icon “Smart
Mode” will appear under the
Set Temperature. The trans-
mitter will automatically ad-
Figure 55
Figure 54
Figure 53
Smart
Mode
Icon
Figure 56