VeEX MPA, Руководство пользователя

Страница: 321 / 842

Protocol Tabs
321
STS-<#> Dropped
Selects a specific STS-# to monitor in the received SONET
signal, where # is the size of the Mapping.
When available, select the STS-<#> Dropped button to enter
the number of the specific STS channel number to be
demuxed and then processed.
For example, this setting selects which of the four STS-
48c channels in an OC-192 signal to be monitored.
The options that appear will depend on your current
Interface and Mapping configuration. The default setting is 1.
When All Path mapping is selected, this setting is
renamed to SPE Dropped . In this mode, all STS-n channels
are analyzed for Errors and Alarms from the Results > All
Path screen, regardless of the selected SPE Dropped.
Payload Pattern
Selects the type of pattern that the unit expects to receive on
the incoming SONET signal.
Select one of the following patterns:
PRBS 9 , PRBS 9 Inv , PRBS 11 , PRBS 11 Inv , PRBS 15 ,
PRBS 15 Inv , PRBS 20 , PRBS 20 Inv , PRBS 23 , PRBS
23 Inv , PRBS 31 , PRBS 31 Inv , User Defined (32-bit value),
or Live .
If licensed for GFP , then GFP payload option is also
available.
When the actual pattern being received does not match
the expected payload pattern, then a pattern mismatch ( Pat
Sync ) alarm occurs.
Power Low
Threshold
Sets the threshold for which the Power Low alarm occurs.
When the received optical power level (in dBm) is lower than
the power low threshold setting, the Power Low alarm will
occur. (MPM-10G card only)
The threshold value is entered using an on-screen keypad,
and can range from -10.0 dBm to -100.0 dBm in increments
of 0.1 dBm. The default value is -100.0 (Disabled).
For the MPM-100G and MPM-100AR cards, the Power
Low Threshold setting is supported on the MLD tab.
MPA_e_manual_D07-00-129P_RevA00