manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 88

87

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Network Port DHCPv6 Client Statistics Fields (Continued)

Field

Description

Release Packets Transmitted

Number of release messages the DHCPv6 client has sent to the server to indicate that it no longer 
needs one or more of the assigned addresses. 

Total Packets Transmitted

Total number of messages sent to all DHCPv6 servers.

Use the buttons to perform the following tasks:

•  Click 

Clear Counters

 to clear all the counters. This resets all statistics for this port to the default values.

•  Click 

Refresh

 to refresh the data on the screen and display the most current statistics.

To retain the changes across the switch’s next power cycle, click 

System

 > 

Configuration Storage

 > 

Save

.

Time-Based Group Statistics

Use the 

Time-Based Group Statistics 

page to define criteria for collecting time-based statistics for interface 

traffic. The time-based statistics can be useful for troubleshooting and diagnostics purposes. The statistics 
application uses the system clock for time-based reporting, so it is important to configure the system clock 
(manually or through SNTP) before using this feature. 
To access the page, click 

System

 > 

Statistics

 > 

Time

 

Based

 > 

Group

 in the navigation menu.

Time-Based Group Statistics

Time-Based Group Statistics Fields

Field

Description

Group 

The type of traffic statistics to collect for the group, which is one of the following: 

• 

Received 

The number of packets received on the interfaces within the group. 

• 

Received Errors 

The number of packets received with errors on the interfaces within the group. 

• 

Transmitted 

The number of packets transmitted by the interfaces within the group. 

• 

Received Transmitted 

The number of packets received and transmitted by the interfaces within 

the group. 

• 

Port Utilization 

The percentage of total bandwidth used by the port within the specified time 

period. 

• 

Congestion 

The percentage of time within the specified time range that the ports experienced 

congestion.

Time Range

The name of the periodic or absolute time range to use for data collection. The time range is 
configured using the 

Time Range Entry Summary

 page (see 

“Time Range Entry Configuration” on 

page 111

). The time range must be configured on the system before the time-based statistics can be 

collected. 

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды