manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 60

59

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Persistent Log

Use the 

Persistent Log

 page to view the persistent log messages.

To access the 

Persistent Log

 page, click 

System

 > 

Log

 > 

Persistent Log

 in the navigation menu.

Persistent Log

Persistent Log Fields

Field

Description

Log Index 

The position of the entry within the buffered log file. The most recent log message always has a 

Log 

Index

 value of 

1

.

Log Time 

The time the entry was added to the log.

Severity 

The severity level associated with the log entry. The severity can be one of the following: 

• 

Emergency (0) 

The device is unusable. 

• 

Alert (1) 

Action must be taken immediately. 

• 

Critical (2) 

The device is experiencing primary system failures. 

• 

Error (3) 

The device is experiencing non-urgent failures. 

• 

Warning (4) 

The device is experiencing conditions that could lead to system errors if no action is 

taken. 

• 

Notice (5) 

The device is experiencing normal but significant conditions. 

• 

Info (6) 

The device is providing non-critical information. 

• 

Debug (7) 

The device is providing debug-level information.

Component 

The component that has issued the log entry. 

Description 

The text description for the log entry. 

Click 

Refresh

 to update the screen and associated messages.

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды