manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 51

50

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Denial of Service Configuration Fields (Continued)

Field

Description

SMAC=DMAC

When selected, this option allows the device to drop packets that have a source MAC address equal to 
the destination MAC address. 

TCP FIN and URG and PSH

When selected, this option allows the device to drop packets that have TCP Flags FIN, URG, and PSH 
set and a TCP Sequence Number equal to 0. 

TCP Flag and Sequence

When selected, this option allows the device to drop packets that have TCP control flags set to 0 and 
the TCP sequence number set to 0. 

TCP SYN

When selected, this option allows the device to drop packets that have TCP Flags SYN set. 

TCP SYN and FIN

When selected, this option allows the device to drop packets that have TCP Flags SYN and FIN set.

TCP Fragment

When selected, this option allows the device to drop packets that have a TCP payload where the IP 
payload length minus the IP header size is less than the minimum allowed TCP header size. 

TCP Offset

When selected, this option allows the device to drop packets that have a TCP header Offset set to 1. 

Min TCP Hdr Size

The minimum TCP header size allowed. If First Fragment DoS prevention is enabled, the device will 
drop packets that have a TCP header smaller than this configured value. 

ICMP Settings

 – These options help prevent the device and the network from attacks that involve issues with the ICMP echo request 

packets (pings) that the device receives.

ICMP 

Enable this option to allow the device to drop ICMP packets that have a type set to ECHO_REQ (ping) 
and a payload size greater than the ICMP payload size configured in the 

Max ICMPv4 Size

 field.

Max ICMPv4 Size

The maximum allowed ICMPv4 packet size. If ICMP DoS prevention is enabled, the device will drop 
ICMPv4 ping packets that have a size greater then this configured maximum ICMPv4 packet size.

ICMPv6

Enable this option to allow the device to drop ICMP packets that have a type set to ECHO_REQ (ping) 
and a payload size greater than the ICMP payload size configured in the 

Max ICMPv6 Size

 field.

Max ICMPv6 Size

The maximum allowed IPv6 ICMP packet size. If ICMP DoS prevention is enabled, the switch will drop 
IPv6 ICMP ping packets that have a size greater than this configured maximum ICMPv6 packet size.

ICMP Fragment

Enable this option to allow the device to drop fragmented ICMP packets.

Use the buttons to perform the following tasks:

•  If you change any of the DoS settings, click 

Submit

 to apply the changes to the running configuration. 

•  Click 

Refresh

 to refresh the page with the most current data from the switch.

To retain the changes across the switch’s next power cycle, click 

System

 > 

Configuration Storage

 > 

Save

.

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды