manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 137

136

Configuring Switching Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

GARP Port Configuration

GARP Port Configuration Fields

Field

Description

Interface

The interface associated with the rest of the data in the row. When configuring one or more interfaces 
in the Edit GARP Port Configuration window, this field identifies the interfaces that are being 
configured.

GVRP Mode

The administrative mode of GVRP on the interface. When enabled, GVRP can help dynamically manage 
VLAN memberships on trunk ports. GVRP must also be enabled globally for the protocol to be active 
on the interface. When disabled, the protocol will not be active on the interface, and the GARP timers 
have no effect.

GMRP Mode

The administrative mode of GMRP on the interface. When enabled, GMRP can help control the 
flooding of multicast traffic by keeping track of group membership information. GMRP must also be 
enabled globally for the protocol to be active on the interface. When disabled, the protocol will not be 
active on the interface, and the GARP timers have no effect.

Join Timer (Centisecs)

The amount of time between the transmission of GARP PDUs registering (or re-registering) 
membership for a VLAN or multicast group.

Leave Timer (Centisecs)

The amount of time to wait after receiving an unregister request for a VLAN or multicast group before 
deleting the associated entry. This timer allows time for another station to assert registration for the 
same attribute in order to maintain uninterrupted service.

Leave All Timer (Centisecs)

The amount of time to wait before sending a LeaveAll PDU after the GARP application has been 
enabled on the interface or the last LeaveAll PDU was sent. A LeaveAll PDU indicates that all 
registrations will shortly be deregistered. Participants will need to rejoin in order to maintain 
registration.

To change the GARP settings for one or more interfaces, select each interface to configure and click 

Edit

. The 

same settings are applied to all selected interfaces. 
Click 

Refresh

 to refresh the page with the most current data from the switch.

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды