manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 139

138

Configuring Switching Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

DHCP Snooping VLAN Configuration

DHCP Snooping VLAN Configuration Fields

Field

Description

VLAN ID

The VLAN ID that is enabled for DHCP snooping. In the Add DHCP Snooping VLAN Configuration 
window, this field lists the VLAN ID of all VLANs that exist on the device. 

DHCP Snooping Mode 

The current administration mode (

Enabled

 or 

Disabled

) of DHCP snooping for the VLAN. Only VLANs 

that are enabled for DHCP snooping appear in the list. 

Use the buttons to perform the following tasks: 

•  To enable a VLAN for DHCP snooping, click 

Add

 and select the VLAN (press and hold CTRL to select 

multiple VLANs). Then, click 

Submit

 to apply the changes.

•  To disable DHCP snooping on one or more VLANs, select each entry to delete and click 

Remove

. You must 

confirm the action before the entry is deleted. 

•  Click 

Refresh

 to refresh the page with the most current data from the switch.

To retain the changes across the switch’s next power cycle, click 

System

 > 

Configuration Storage

 > 

Save

.

DHCP Snooping Interface Configuration 

Use this page to view and configure the DHCP snooping settings for each interface. The DHCP snooping 
feature processes incoming DHCP messages. For DHCPRELEASE and DHCPDECLINE messages, the feature 
compares the receive interface and VLAN with the client’s interface and VLAN in the binding database. If 
the interfaces do not match, the application logs the event (when logging of invalid packets is enabled) and 
drops the message. If MAC address validation is globally enabled, messages that pass the initial validation are 
checked to verify that the source MAC address and the DHCP client hardware address match. Where there 
is a mismatch, DHCP snooping logs the event (when logging of invalid packets is enabled) and drops the 
packet. To change the DHCP Snooping settings for one or more interfaces, select each entry to modify and 
click 

Edit

. The same settings are applied to all selected interfaces. 

To access the 

DHCP Snooping Interface Configuration

 page, click 

Switching

 > 

DHCP Snooping

 > 

Base

 > 

Interface Configuration

 in the navigation menu.

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды