manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 70

69

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Mirroring

Port mirroring selects the network traffic for analysis by a network analyzer. This is done for specific ports 
of the switch. As such, many switch ports are configured as source ports and one switch port is configured 
as a destination port. You have the ability to configure how traffic is mirrored on a source port. Packets that 
are received on the source port, that are transmitted on a port, or are both received and transmitted, can be 
mirrored to the destination port.
The packet that is copied to the destination port is in the same format as the original packet on the wire. 
This means that if the mirror is copying a received packet, the copied packet is VLAN tagged or untagged as 
it was received on the source port. If the mirror is copying a transmitted packet, the copied packet is VLAN 
tagged or untagged as it is being transmitted on the source port.
Use the 

Multiple Port Mirroring

 page to define port mirroring sessions. To access the 

Multiple Port Mirroring

 

page, click 

System

 > 

Port

 > 

Mirroring

 in the navigation menu.

Multiple Port Mirroring

Multiple Port Mirroring Fields

Field

Description

Session ID 

Specifies the monitoring session.

Mode

The administrative mode for the selected port mirroring session. If the mode is 

Disabled

, the 

configured source is not mirroring traffic to the destination.

Destination 

The interface that receives traffic from all configured source ports. 
To edit this field, click 

 to open the 

Destination Configuration

 dialog box (see 

“” on page 70 

for 

more information).

IP ACL

The IP access-list ID or name attached to the port mirroring session. 

MAC ACL

The MAC access-list name attached to the port mirroring session. 

Source 

Possible values are: 

• 

VLAN 

All the member ports of this VLAN are mirrored. 

• 

Interface 

The port(s) configured to send traffic to the destination port. You can configure up to 5 

source ports for each port mirroring session. 

Direction 

The direction of traffic on the source port(s) that is sent to the probe port. Possible values are: 

• 

Tx and Rx 

Both ingress and egress traffic. 

• 

Rx 

Ingress traffic only. 

• 

Tx 

Egress traffic only. 

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды