manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 18

17

Configuring Power over Ethernet

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Chapter 2: Configuring Power over Ethernet

Use the PoE feature menu to display and configure the switch’s Power over Ethernet (PoE) settings. The PoE 
tab contains links to the following features:

• 

“Configuring PoE” on page 17

Configuring PoE

This page displays information about the PoE settings on the switch’s interfaces and allows you to configure 
those settings. 
To access the 

Power Over Ethernet

 page, click 

PoE

 > 

PoE Configuration

 in the navigation menu.

Power Over Ethernet

Power Over Ethernet Fields

Field

Description

Interface

The interface (slot/port) for which PoE information is displayed.

PoE Mode

The PoE mode on the interface:

• 

Off 

PoE is disabled for the interface.

• 

54V auto 

Standard PoE/PoE+ (802.3af/at) with auto-sensing is enabled for the interface.

• 

24V passive 

Passive 24V PoE output is enabled for the interface.

Note:

 The 24V passive setting causes power to be output immediately with no auto-sensing. Before 

applying the 24V passive setting, ensure that the connected device can accept passive 24V PoE power.

The following fields apply only to interfaces whose PoE mode is set to 

54V auto

:

PoE Output

The interface’s current PoE output power in W

Current

The interface’s current output current in mA

Voltage

The interface’s current output voltage in V

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды