manualshive.com logo in svg

Ubiquiti ES-24-250W, Руководство администратора

Поделиться
Скачать
Ubiquiti ES-24-250W Скачать руководство пользователя страница 134

133

Configuring Switching Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Voice VLAN Interface Summary

Voice VLAN Interface Summary Fields

Field

Description

Interface

The interface associated with the rest of the data in the row. When adding a Voice VLAN configuration 
to a port, the Interface menu allows you to select the port to configure. Only interfaces that have not 
been configured with Voice VLAN settings can be selected from the menu. 

Operational State

The operational status of the Voice VLAN feature on the interface. To be enabled, Voice VLAN must be 
globally enabled and enabled on the interface. Additionally, the interface must be up and have a link. 

CoS Override Mode

The Class of Service override mode:

• 

Enabled 

The port ignores the 802.1p priority value in the Ethernet frames it receives from 

connected devices.

• 

Disabled 

The port trusts the priority value in the received frame.

Voice VLAN Interface Mode

Indicates how an IP phone connected to the port should send voice traffic:

• 

VLAN ID 

Forward voice traffic in the specified voice VLAN.

• 

Dot1p 

Tag voice traffic with the specified 802.1p priority value.

• 

None 

Use the settings configured on the IP phone to send untagged voice traffic.

• 

Untagged 

Send untagged voice traffic.

• 

Disable 

Operationally disables the Voice VLAN feature on the interface.

Add Voice VLAN and Edit Voice VLAN

 dialog boxes – When you click 

Add

 or 

Edit

, the following configurable field is displayed:

Voice VLAN Interface Value

When adding or editing Voice VLAN settings for an interface and either 

VLAN ID

 or 

Dot1p

 is selected 

as the 

Voice VLAN Interface Mode

, specify the voice VLAN ID or the Dot1p priority value that the 

connected IP phone should use for voice traffic. 

Use the buttons to perform the following tasks:

•  To configure Voice VLAN settings on a port, click 

Add

. Select the interface to configure from the 

Interface

 

drop-down menu, configure the remaining settings, and then click 

Submit

 to apply the changes.

•  To change the Voice VLAN settings, select the interface to modify and click 

Edit

, configure the settings as 

needed, and then click 

Submit

 to apply the changes.

•  To remove the Voice VLAN configuration from one or more ports, select each entry to delete, click 

Remove

, and confirm the deletion.

•  Click 

Refresh

 to refresh the page with the most current data from the switch.

To retain the changes across the switch’s next power cycle, click 

System

 > 

Configuration Storage

 > 

Save

.

Содержание ES-24-250W



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды