34
Instructions for use - Tiva2 - Tiva2H Thermodisinfector
5.4 Filters, spray arms and regeneration rooms
5.4.1 Filters
Insert the supplied filters in the specific positions. Constantly
check the cleanliness of the filters, especially the tank bottom
filter (3 Fig. 9).
Use this filter to have a high filtering, taking into account that
it will have to be cleaned after each cycle performed to avoid
an excessive build-up of dirt.
Insert the mesh filter (2 Fig. 9) and place it in the tank seat.
Finally, insert the central filter (1 Fig. 9) in the mesh filter hole.
5.4.2 Spray arms
The two spray arms are supplied loose to avoid possible
breakage during transport. Place the two spray arms (top and
bottom) in their seats and tighten them to the relative central
pin inside the tank as shown in Fig. 10.
Fig. 9 - Filter unit
1) Central filter. - 2) Mesh filter. - 3) Tank bottom filter. - 4) Salt
tank cap.
1
2
3
4
