75
Maintenance
Problem
Cause
Solution
The machine does not start Tripped fuse/
Activate the fuse
circuit breaker of the electrical /switch of the electrical
system. system.
The machine is off.
Press the ON/OFF key
The program does not start Door closed not
Check closure
correctly.
of the door
The program stops
No chemical products.
Turn off the machine and
fill the containers.
Water flow closed.
Open the water flow.
The temperature of
The thermostat sensor in the Clean the thermostat
sensor
operation for the
wash tank is covered
program is not
with deposits.
reached
The machine does not dry The air filter in the drying Replace the filter. Have
system is dirty or
extraordinary maintenance
clogged.
performed by technical assis-
tance.
White deposits in the
Softener finished due to
Add the salt for
washing tank
lack of salt.
regeneration.
7.2 Troubleshooting
The following table lists the main malfunctions, with relative
causes and recommended solutions, that the machine could
present during its operation.
The interventions that may become necessary must be carried
out by experienced and qualified operators.
If the problems persist or appear even more often after perform-
ing the work reported below, contact the Tuttnauer Europe b.v.
technical assistance of an authorised and qualified technician.
