54
Instructions for use - Tiva2 - Tiva2H Thermodisinfector
6.5 Starting the machine
After checking the integrity and full efficiency of the machine,
proceed with start-up.
1) Power the machine using the main circuit breaker.
2) Start the machine using the ON-OFF switch (1 Fig. 13) and
open the door (key 5 Fig. 12) to introduce the baskets.
6.5.1 Before starting the program
Before starting each program, check:
- Check that the filters, positioned on the bottom of the tank
(Fig. 9) are perfectly clean. Clean them, if necessary.
- The nozzles of the upper and lower spray arms must be free
and clean.
- Basket and products must be arranged correctly.
- The rinse arms must be able to rotate freely. The machine
constantly monitors the rotation speed during the program.
- Liquid containers must be sufficiently filled. Check for any
messages on the display before starting the program.
Closing the door
- Introduce the basket and load the instruments.
- Close the door and push it until the lock is activated. The door
can be unlocked and opened at any time before the program
starts, by pressing the key (5 Fig. 12).
Selecting the program
To select the programs available, use key 1, 2 or 3 on the
control panel (Fig. 12).
Choose the most suitable program depending on the level of
dirt on the products to be washed.
Program 1 «SHORT»
is a washing and disinfection program
for normal dirt, sufficient for daily used instruments.
