19
Safety and prevention
3.1.2 Installer obligations
•
The thermodisinfector must be installed and set up for use
exclusively by specialised personnel and authorised by
Tuttnauer Europe b.v..
•
Check that the machine has not been damaged during
transport and handling.
•
Use the thermodisinfector only in environments that are not
at risk of fire and/or explosion and in rooms at ambient tem-
perature.
•
Before installing the equipment, ensure that the supply volt-
age complies with the one shown on the identification plate
and that the water supply pressure is equal to the one indi-
cated in the technical data. Furthermore, make sure that the
drain matches the dimensions provided on the installation
drawing.
•
The electrical and water connections can only be made by
specialised technicians, paying particular attention not to
crush the power supply cable and the water flexible hoses.
•
Do not use the machine without securing it to the ground
using the fixing kit supplied with it.
•
Do not install the machine in the same room where patients
are housed. The machine can heat the environment, thus
increasing humidity.
3.1.3 Operator obligations
•
Before starting to operate for the first time, familiarise with
the control devices and their functions.
•
The operator must not carry out operations or interventions
which are not within his/her competence on their own initia-
tive.
•
It is strictly forbidden to operate or have the machine operated
by anyone who has not read and understood the information
in this manual, as well as by unskilled personnel who are not
in good mental and physical health.
•
The machine must not be operated with the guards removed
or partly damaged.
•
Use the thermodisinfector only for the operations described
in this manual.
•
Do not damage or change the power cable or plug.
