52
Instructions for use - Tiva2 - Tiva2H Thermodisinfector
6.4 Programs
The machine leaves the factory programmed with three
separate use programs already entered in the settings
menu.
To select the programs available, use key 1, 2 or 3 (on the
control panel Fig. 12) depending on the most suitable program
for the level of dirt of the load.
The following table shows the correct programs for each type
of load.
Program Use
SHORT
Washing and disinfection program for the
Program 1
treatment of instruments with normal dirt, with
times and dosages lower than Program 2.
STANDARD
Filling of the dosing system with additive
Pro-
gram 2
for final rinsing or neutralising after
filling or replacement of the container.
Program tested and certified according to EN
ISO 15883.
INTENSIVE
Washing and disinfection program (not
Program 3
EN ISO 15883 certified) specific for the
treatment of instruments with stubborn dirt.
Rinse
For rinsing water and salt solution of
cold water
a particularly dirty load, e.g.: to eliminate
coarse dirt or disinfectant residues
before treatment and to prevent dirt
from drying or the formation of
limescale until a complete program
is started.
Drying
Additional drying.
