3001V–02
F40163
F40164
C83015
30–2
–
DRIVE SHAFT / PROPELLER SHAFT
DRIVE SHAFT, PROPELLER SHAFT, AXLE
1956
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
ON–VEHICLE INSPECTION
1.
REMOVE FRONT WHEEL
2.
DISCONNECT FRONT DISC BRAKE CALIPER ASSY LH(See page
30–21
)
3.
REMOVE FRONT DISC
4.
INSPECT FRONT AXLE HUB BEARING BACKLASH
(a)
Using a dial indicator, check the backlash near the center
of the axle hub.
Maximum: 0.05 mm (0.0020 in.)
If the backlash exceeds the maximum, replace the bearing.
5.
INSPECT FRONT AXLE HUB DEVIATION
(a)
Using a dial indicator, check the deviation at the surface
of the axle hub outside the hub bolt.
Maximum: 0.05 mm (0.0020 in.)
If the backlash exceeds the maximum, replace the axle hub.
6.
INSTALL FRONT DISC
7.
INSTALL FRONT DISC BRAKE CALIPER ASSY LH(See page
30–21
)
8.
INSTALL FRONT WHEEL
Torque: 103 N
⋅
m (1,050 kgf
⋅
cm, 76 ft
⋅
lbf)
9.
REMOVE REAR WHEEL
10.
DISCONNECT REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)
(See page
30–28
)
11.
REMOVE REAR DISC(DISC REAR BRAKE TYPE)
12.
REMOVE REAR BRAKE DRUM SUB–ASSY(DRUM REAR BRAKE TYPE)
13.
INSPECT REAR AXLE HUB BEARING BACKLASH
(a)
Set a dial indicator near the center of the axle hub and
check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 in.)
If the backlash exceeds the maximum, replace the axle hub as-
sembly.
