5105S–01
F40531
SST
C92274
F41595
Matchmarks
–
POWER STEERING
RACK & PINION POWER STEERING GEAR ASSY
51–29
2296
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
OVERHAUL
NOTICE:
When installing , coat the parts indicated by the arrow with power steering fluid or molybdenum disul-
fide lithium base grease (See page
51–26
).
1.
PRECAUTION(See page
51–1
)
2.
DISCONNECT BATTERY NEGATIVE TERMINAL
3.
REMOVE HORN BUTTON ASSY
(See page
50–9
,
50–22
)
4.
REMOVE STEERING WHEEL ASSY
(See page
50–9
,
50–22
)
SST
09950–50013 (09951–05010, 09952–05010, 09953–05020, 09954–05021)
5.
REMOVE FRONT WHEEL
6.
REMOVE SPIRAL CABLE SUB–ASSY
(See page
50–9
,
50–22
)
7.
DISCONNECT TIE ROD ASSY LH
(a)
Remove the cotter pin and nut.
(b)
Using SST, remove the tie rod assy LH from the steering
knuckle.
SST
09628–62011
8.
DISCONNECT TIE ROD ASSY RH
SST
09628–62011
HINT:
Remove the RH side by the same procedures with LH side.
9.
DISCONNECT STEERING INTERMEDIATE SHAFT
SUB–ASSY
(a)
Loosen the bolt and remove the clamp from the steering
column hole cover No.1.
(b)
Disconnect the steering column hole cover No.2 from the
steering column hole cover No.1.
(c)
Loosen the bolt.
(d)
Place matchmarks on the steering intermediate shaft
sub–assy and rack & pinion power steering gear assy.
(e)
Remove the bolt and separate the steering intermediate
shaft sub–assy.
