40064–02
C83111
AT0103
D25591
D09179
–
AUTOMATIC TRANSMISSION / TRANS
TRANSMISSION VALVE BODY ASSY
40–29
2104
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
TRANSMISSION VALVE BODY ASSY
REPLACEMENT
1.
REMOVE ENGINE UNDER COVER RH
2.
DRAIN AUTOMATIC TRANSAXLE FLUID
(a)
Remove the drain plug and gasket, and drain ATF.
(b)
Install a new gasket and drain plug.
Torque: 49 N
⋅
m (500 kgf
⋅
cm, 36 ft
⋅
lbf)
3.
REMOVE AUTOMATIC TRANSAXLE OIL PAN
SUB–ASSY
(a)
Remove the 18 bolts, oil pan and gasket.
NOTICE:
Some fluid will remain in the oil pan. Remove all pan bolts,
and carefully remove the oil pan assembly.
(b)
Remove the 2 magnets from the oil pan.
(c)
Examine particles in pan.
(1)
Remove the magnets and use them to collect any
steel chips. Look carefully at the chips and particles
in the pan and the magnet to anticipate what type
of wear you will find in the transaxle.
Steel (magnetic): bearing, gear and plate wear
Brass (non–magnetic): bearing wear
4.
DISCONNECT TRANSMISSION WIRE
(a)
Disconnect the 5 shift solenoid valve connectors.
(b)
Remove the bolt and lock plate, and disconnect the ATF
temperature sensor.
5.
REMOVE VALVE BODY OIL STRAINER ASSY
(a)
Remove the 3 bolts and oil strainer.
NOTICE:
Be careful as some fluid will come out with the oil strainer.
