1. Insert the already registered master key in the key
cylinder.
2. Depress and release the acceleration pedal 6 times.
3. Depress and release the brake pedal 7 times.
4. Remove the master key.
END
(Key code erased)
Within 15 sec.
Within 20 sec.
Within 10 sec.
HINT:
When the key cannot be pulled out in step 4, key code deletion is canceled.
73–30
–
THEFT DETERRENT & DOOR LOCK
ENGINE IMMOBILISER SYSTEM
2663
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
4.
ERASURE OF KEY CODE
There are 2 ways for erasure of transponder key codes; one way is depressing the brake pedal and accelera-
tion pedal and the other way is using hand–held tester.
HINT:
Delete all the other master and sub–key codes than a master key code to use the erasing operation.
When using the key which was used for deletion, it is necessary to register the code again.
When any operation time described below is over, registration mode will be stopped forcibly.
When the next procedure is started while the timer is working, the timer stops working, then the next
timer starts.
(1)
Depressing the brake pedal and acceleration pedal:
