H40008
Wire Harness
Diameter
Stripped Wire Harness Section
H41437
60–52
–
SUPPLEMENTAL RESTRAINT SYSTEM
FRONT SEAT AIRBAG ASSY RH
2435
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
HINT:
When scrapping a vehicle, deploy the airbag and scrap the ve-
hicle with the front seat airbag assy still installed.
2.
DISPOSE FRONT SEAT AIRBAG ASSY RH(WHEN
DISPOSING OF AIRBAG ASSEMBLY DEPLOYMENT
METHOD)
NOTICE:
When disposing of the front seat airbag assy only,
never use the customer’s vehicle to deploy the air-
bag.
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Have a battery ready as the power source to deploy the airbag.
(a)
Remove the front seat airbag assy.
(1)
Remove the 2 nuts and front seat airbag assy from
the seatback assembly.
CAUTION:
Store the front seat airbag assy with the airbag deployment
side facing upward.
(b)
Using a service–purpose wire harness, tie down the front
seat airbag assy.
Wire harness: Stripped wire harness section
1.25 mm
2
or more (0.0019 in
2
or more)
HINT:
To calculate the square of the stripped wire harness section :
Square = 3.14 x (Diameter)
2
divided by 4
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the front seat airbag assy, it may be
snapped by the shock when the airbag is deployed. This is
highly dangerous. Always use a wire harness for vehicle
use which is at least 1.25 mm
2
(0.0019 in
2
).
(1)
Install the 2 nuts in the front seat airbag assy.
