73083–01
–
THEFT DETERRENT & DOOR LOCK
POWER DOOR LOCK CONTROL SYSTEM
73–1
2634
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
POWER DOOR LOCK CONTROL SYSTEM
ON–VEHICLE INSPECTION
1.
DOOR LOCK FAIL–SAFE
(a)
When a malfunction in the door control switch (manual switch, interlocked operation with key) has been
detected, door LOCK/UNLOCK operations become unable.
2.
CHECK FOR ELECTRICAL DOOR LOCK OPERATION
(a)
Check the basic function.
(1)
Check all doors will lock when the door control switch (for manual operation) is turned to the lock
side and all doors will unlock when turned to the unlock side.
(2)
Check all doors will lock when the driver’s door is operated to be lock and all doors will unlock
when operated to be unlock, by the key operation outside the vehicle.
(b)
Check the key confinement prevention function.
NOTICE:
In order to prevent the key from confined, the inspection should be made with the driver’s door glass
open.
(1)
Insert the ignition key into the ignition switch lock cylinder.
(2)
With the driver’s door open, check all doors will immediately unlock when the door lock knob for
the driver’s door is turned to the lock side.
(3)
With the driver’s door open, check all doors will immediately unlock when the door control switch
(for manual operation) is turned to the lock side.
(4)
With the driver’s door open, lock the driver’s door lock by holding the driver’s door lock knob in
the lock side for 2 seconds or more and then close the driver’s door. Then, check that all doors
will unlock.
(c)
Check the security function.
(1)
Close all doors with the driver’s door glass open so that the door control switch can be operated
outside the vehicle.
(2)
Pull out the ignition key, open the driver’s door, and close and lock the door without a key opera-
tion. Under this condition, check that all doors will not unlock when the door control switch (for
manual operation) is turned to the unlock side outside the vehicle.
(3)
Pull out the ignition key, close and lock the driver’s door by the key operation. Under this condi-
tion, check that all doors will not unlock when the door control switch (for manual operation) is
turned to the unlock side outside the vehicle.
(4)
Pull out the ignition key, close the driver’s door and lock the door by the wireless door lock opera-
tion. Under this condition, check that all doors will not unlock when the door control switch (for
manual operation) is turned to the unlock side outside the vehicle.
HINT:
Under the conditions below, check that the security function will cancel.
Ignition switch turned ON.
Driver’s door unlocked by the key operation.
Door control switch (for manual operation) turned to the unlock side after unlocking the door control
knob manually.
Doors are unlocked by the wireless operation.
