40067–02
C63995
IG
E
STP
–
AUTOMATIC TRANSMISSION / TRANS
SHIFT LOCK SYSTEM
40–37
2112
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
SHIFT LOCK SYSTEM
ON–VEHICLE INSPECTION
1.
CHECK SHIFT LOCK OPERATION
(a)
Shift the shift lever to P position.
(b)
Turn the ignition switch to LOCK.
(c)
Check that the shift lever cannot be shifted to any other positions other than P.
(d)
Turn the ignition switch to ON, depress the brake pedal and check that the shift lever can be shifted
to any other positions.
2.
CHECK SHIFT LOCK RELEASE BUTTON OPERATION
(a)
Using a screwdriver, remove the shift lock release button cover.
(b)
When operating the shift lever with the shift lock release button pressed and the ignition key in ACC
or ON, check that the lever can be shifted to any other position.
3.
CHECK KEY INTERLOCK OPERATION
(a)
Turn the ignition switch to ON.
(b)
Depress the brake pedal and shift the shift lever to any other positions other than P.
(c)
Check that the ignition key cannot be turned to LOCK.
(d)
Shift the shift lever to P position, turn the ignition key to LOCK and check that the ignition key can be
removed.
4.
INSPECT SHIFT LOCK CONTROL SWITCH
(a)
Using a voltmeter, measure the voltage at each terminal.
HINT:
Do not disconnect the shift lock control unit connector.
Terminal
Measuring Condition
Voltage (V)
5 (IG) – 1 (E)
Ignition switch ON
10 – 14
5 (IG) – 1 (E)
Ignition switch OFF
0
3 (STP) – 1 (E)
Depress brake pedal
10 – 14
3 (STP) – 1 (E)
Release brake pedal
0
