Toyota 2002 Camry, Руководство по обслуживанию

Страница: 1179 / 1283

73084–01
B50826
ON–LOCK operation: 1 time
Add Mode
Rewrite Mode
ON–LOCK operation: 2 times
Confirmation Mode
ON–LOCK operation: 3 times
Prohibition Mode
ON–LOCK operation: 5 times
Approx. 1 sec.
Approx.
1 sec.
Approx.
1 sec.
Approx.
1 sec.
Approx.
1 sec.
Approx.
1 sec.
Approx.
1 sec.
ON
LOCK
ON
LOCK
ON
LOCK
ON
LOCK
73–8
– THEFT DETERRENT & DOOR LOCK DOOR CONTROL TRANSMITTER
2641
Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U) Corrected 8/05/02 – MH
DOOR CONTROL TRANSMITTER
REPLACEMENT
1. REGISTRATION OF RECOGINITION CODE
HINT:
The add mode is used to retain already registered codes while registering new recognition codes. This
mode is used when adding a transmitter. If the number of registered codes exceeds 4, previously regis-
tered codes will be correspondingly erased in order, starting from the first registered code.
The rewrite mode is used to erase all the previously registered codes and register only new recognition
codes. This mode is used when exchanging the transmitter or the door control receiver with new one.
The prohibition mode is used to erase all the registered codes and cancels the wireless door lock func-
tion. Use this mode when the transmitter is lost.
The confirmation mode is for confirming how many recognition codes have already been registered
before an additional registration of a recognition code.
(a) The vehicle should be in the following conditions.
(1)
The key is not inserted in the ignition key cylinder.
(2) Driver’s door is OPENED. (The other doors are CLOSED)
(3) Driver’s door is UNLOCKED.
(b) Perform the followings after the above operations.
(1)
Insert and remove the key from the ignition key cylinder twice within 5 seconds.
(2) After the above operations, close and open the driver door twice within 40 seconds. Then insert
the key into the ignition key cylinder and remove it.
(3) After the above operations, close and open the driver door twice within 40 seconds. Then insert
the key into the ignition key cylinder and close the door.
(4) Turn the ignition switch from LOCK to ON and back to LOCK at approximately. 1 second interval
1 to 5 times to select the mode. Then remove the key from the ignition key cylinder.
NOTICE:
If the number of the ON–LOCK operation of the ignition switch is 0, 4 or 6 or more, the operation will
finish without any signs.