D26290
Lock
Projecting Part
A
D26295
Serrate Part
41–10
–
MANUAL TRANSMISSION/TRANSAXLE
FLOOR SHIFT CABLE TRANSMISSION CONTROL
SELECT
2140
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(e)
Connect the select cable to the shift lever retainer.
NOTICE:
The projecting part of the cable outer should face up-
ward when the select cable is installed.
Make sure that after installation the cable outer lock
is projecting from A shown in the illustration.
(f)
Connect the top of the select cable to the shift lever assy
and install the clip.
NOTICE:
The serrate part of the select cable point should face
upward when the select cable point is connected.
the clip should be inserted to the direction shown in
the illustration.
(g)
Connect the top of the select cable to the shift lever assy
and install the clip.
(h)
Connect the select cable to the control cable bracket and
install a new clip.
(i)
Connect the select cable to the transaxle and install the
washer and clip.
6.
INSTALL AIR BAG SENSOR ASSY CENTER
(See page
60–56
)
7.
INSTALL AIR CONDITIONING RADIATOR ASSY
(See page
55–29
)
8.
INSTALL INSTRUMENT PANEL SAFETY PAD SUB–ASSY
(See page
71–12
)
9.
INSPECT SRS WARNING LIGHT(See page
05–690
)
