Adhesive
Adhesive
BO4420
–
WINDSHIELD/WINDOWGLASS/MIRROR
BACK WINDOW GLASS
70–15
2548
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
17.
INSTALL BACK WINDOW GLASS
(a)
Clean and shape the contact surface of the vehicle’s body
(1)
Using a knife, cut away any rough areas on the
body.
HINT:
Leave as much adhesive on the body as possible.
(2)
Clean the cut surface of the adhesive with a piece
of shop rag saturated in cleaner.
(b)
Position the glass.
(1)
Using a suction rubber, place the glass in the correct position.
(2)
Check that all the contacting parts of the glass rim are perfectly even.
(3)
Place reference marks between the glass and body.
NOTICE:
Check that the stoppers are attached to the body correctly.
HINT:
When reusing the glass, check and correct the reference mark’s positions.
(4)
Remove the glass.
(c)
Coat the contact surface of the back door with Primer M.
(d)
Using a bursh, coat Primer M to the exposed part of the contact surface on the vehicle side with Primer
M.
NOTICE:
Dry the primer coating for 3 minutes or more.
Do not coat the adhesive with Primer M.
Do not apply too much Primer.
(e)
Coat the contact surface of the glass with Primer G.
(1)
Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
NOTICE:
Dry the primer coating for 3 minutes or more.
Do not apply too much primer.
