H40016
H01337
Front Seat
Airbag Assy
SST
10 m (33ft) or more
Battery
H00544
60–54
–
SUPPLEMENTAL RESTRAINT SYSTEM
FRONT SEAT AIRBAG ASSY RH
2437
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(3)
Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harness is tight. It is very danger-
ous if looseness in the wire harness results in the tires
coming free due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Secure
at least 1 m (3 ft) of slack for the wire harness.
(e)
Install the SST.
Connect the connectors of the 2 SST to the front seat air-
bag assy connector.
SST
09082–00700, 09082–00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
(f)
Deploy the airbag.
(1)
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(–) terminal.
(2)
Check that no one is within 10 m (33 ft) area around
the tire which the front seat airbag assy is tied to.
(3)
Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(g)
Dispose of the front seat airbag assy.
CAUTION:
The front seat airbag assy is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
Use gloves and safety glasses when handling a front
seat airbag assy with the deployed airbag.
Do not apply water etc. to a front seat airbag assy with
the deployed airbag.
Always wash your hands with water after completing
the operation.
(1)
Remove the front seat airbag assy from the tire.
(2)
Place the front seat airbag assy in a vinyl bag, tie the
end tightly and dispose of it in the same way as oth-
er general parts disposal.
