I30899
Fuel Sender Gauge:
71–4
–
INSTRUMENT PANEL/METER
COMBINATION METER
2567
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
3.
INSPECT TACHOMETER
(a)
Check the operation
(1)
Connect a tune–up test tachometer, and start the engine.
NOTICE:
Reversing the connection of the tachometer will damage the transistors and diodes inside.
When removing or installing the tachometer, be careful not to drop or subject it to heavy
shocks.
(2)
Compare the test and tachometer indications.
DC 13.5 V, 25
C at (77
F)
Standard indication (r/min)
Allowable range (r/min)
Data in ( ) are for reference
700
630 – 770
1,000
(900 – 1,100)
2,000
(1,850 – 2,150)
3,000
2,800 – 3,200
4,000
(4,800 – 5,200)
5,000
5,750 – 6,250
6,000
(6,700 – 7,300)
4.
INSPECT FUEL RECEIVER GAUGE
(a)
Inspect the circuit.
(1)
Disconnect the connector from the sender gauge.
(2)
Turn the ignition switch ON, then check the position
of the receiver gauge needle.
Standard:
Needle position is EMPTY and FUEL warning light is
ON.
5.
INSPECT FUEL LEVEL WARNING
(a)
Inspect the circuit.
(1)
Disconnect the connector from the sender gauge.
(2)
Turn the ignition switch to ON, check the fuel level needle indicates EMPTY and fuel level warn-
ing lights light on.
6.
INSPECT ENGINE COOLANT TEMPERATURE RECEIVER GAUGE WARNING LIGHT
(a)
Inspect the circuit.
(1)
Disconnect the connector from the sender gauge.
(2)
Turn the ignition switch to ON, check the position of the water temperature receiver gauge
needle.
Needle position: COOL
(3)
Ground terminal 2 on the wire harness side, then check the position of the water temperature
receiver gauge needle.
Needle position: HOT
