–
DRIVE SHAFT / PROPELLER SHAFT
REAR AXLE CARRIER SUB–ASSY LH
30–33
1987
Author:
Date:
2002 CAMRY REPAIR MANUAL (RM881U)
16.
INSTALL REAR BRAKE TUBE NO.4(DRUM REAR BRAKE TYPE)
(a)
Using SST, install the rear brake tube No.4 to the LH front or upper rear wheel brake cylinder assy.
SST
09023–00100
Torque: 15.2 N
⋅
m (155 kgf
⋅
cm,11 ft
⋅
lbf)
17.
INSTALL SKID CONTROL SENSOR WIRE(W/ ABS)
18.
INSTALL REAR DISC(DISC REAR BRAKE TYPE)
19.
INSTALL REAR DISC BRAKE CALIPER ASSY LH(DISC REAR BRAKE TYPE)
(See page
30–28
)
20.
INSTALL REAR BRAKE DRUM SUB–ASSY(DRUM REAR BRAKE TYPE)
21.
TEMPORARY TIGHTEN STRUT ROD ASSY REAR
(See page
27–19
)
22.
STABILIZE SUSPENSION(See page
27–19
)
23.
FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH
(See page
27–10
)
24.
FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH
(See page
27–14
)
25.
FULLY TIGHTEN STRUT ROD ASSY REAR
(See page
27–19
)
26.
FILL RESERVOIR WITH BRAKE FLUID(DRUM REAR BRAKE TYPE)
27.
BLEED MASTER CYLINDER(DRUM REAR BRAKE TYPE)(See page
32–4
)
SST
09023–00100
28.
BLEED BRAKE LINE(DRUM REAR BRAKE TYPE)
29.
CHECK FLUID LEVEL IN RESERVOIR(DRUM REAR BRAKE TYPE)
30.
CHECK BRAKE FLUID LEAKAGE(DRUM REAR BRAKE TYPE)
31.
INSTALL REAR WHEEL
Torque: 103 N
⋅
m (1,050 kgf
⋅
cm, 76 ft
⋅
lbf)
32.
INSPECT AND ADJUST REAR WHEEL ALIGNMENT(See page
27–3
)
33.
CHECK ABS SPEED SENSOR SIGNAL(W/ ABS)
w/ VSC (See page
05–452
)
w/o VSC (BOSCH MADE) (See page
05–363
)
w/o VSC (DENSO MADE) (See page
05–404
)
