OPERATOR’S MANUAL
series Robot Controller
When the available memory space becomes small during editing operation, a
warning saying "A few memory remains" is displayed. When this happens,
quit the program editing mode, delete any unnecessary file or files, then
resume the program editing operation.
If character input continues with the warning of "A few memory remains"
displayed, a warning of "File full" is displayed and the subsequent character
input is invalid. If you try to quit the program editing mode, a warning saying
"Delete some data until rem
>
=0" is displayed, and you cannot finish the
program editing. Delete program contents, then terminate the editing.
P R G R A M . N A M
C : 6
L : 1
P R O G R _
F i l e f u l l
S A V E
D E D I T
J U M P
F I N D
C H A N G
>
(4)
Cautions
• When the program editor has started up, the insert mode takes effect.
• The insert mode is discriminated from the replace mode by the shape of the
cursor.
Insert
mode :
_
Replace
mode
:
• When the EXE key is pressed while the cursor is located at the top of a line
in the insert mode, a blank line is inserted at the cursor position.
STE 80720
– 4-8 –
