Toshiba TOSVERT VF-AS3, Инструкция по эксплуатации

Страница: 158 / 622

E6582062 
4. [Basic operation] Operation methods of motor
4-34
4
9
8 Select <CMOd: Run command select> and press
the [OK] key.
You can also select <CMOd: Run command
select> on the [Easy mode] screen.
The setting screen is displayed.
9 Select "0: Terminal" and press the [OK] key.
The basic parameter screen is displayed.
Check that the setting value of <CMOd: Run
command select> is "0."
10 Select <FMOd: Frequency command select 1> and press the [OK] key.
The setting screen is displayed.
11 Select "1: Terminal RR" and press the [OK] key.
0.0Hz STOP
15:51
Basic parameters
CMOd
: Run command select
FMOd
: Frequency command select 1
vb
: Manual torque boost 1
vL
: Base frequency 1
1
10
4.80%
60.0Hz
Pt
: V/f Pattern
0
2: Embedded Ethernet
3: RS485 com (connector 1)
4: RS485 com (connector 2)
5: Communication option
0.0Hz STOP
15:51
CMOd :Run command select
1: Operation panel,Ext panel
1: Operation panel,Ext panel
2: Embedded Ethernet
3: RS485 com (connector 1)
4: RS485 com (connector 2)
0.0Hz STOP
15:51
CMOd :Run command select
0: Terminal
F R
2: Terminal RX
3: Terminal
Ⅱ
4: Terminal AI4(option)
0.0Hz STOP
15:55
FMOd :Frequency command select 1
0: -
1: Terminal RR
F R