Toshiba MMC-P0151H, Руководство по обслуживанию

Страница: 122 / 216

3-119
Model name
MMU-
Part No.
P0121H
P0151H
P0181H
P0241H P0301H P0361H P0481H
Status at shipment
from factory
J15
¡
X
¡
X
¡
X
¡
J16
X
¡ ¡
X X
¡ ¡
J17
X X X
¡ ¡ ¡ ¡
Service P.C. Board Selection Information
[4-way air discharge cassette type]
Service P.C. board selection corresponded table (Main P.C. board MCC-1361)
The indoor control P.C. board (MCC-1361) can correspond to multiple models. When replacing P.C. board
assembly, set the DIP switch, rotary switch, and jumper(s) according to the following description.
Switch set up
1 SW01 Indoor unit No. : Match to No. which the rotary switch is set up.
: Master unit ...... 1
: Server units ..... 2 to 16
2 SW02 Network address : Match to set up contents of P.C. board before replacement.
3 SW03 : Match to set up contents of P.C. board before replacement.
4 SW05 (Bit 1) : Match to set up contents of P.C. board before replacement.
5 SW05 (Bit 2) : Set to OFF side.
6 SW06 : Match to set up contents of P.C. board before replacement.
7 SW07 : Match to set up contents of P.C. board before replacement.
8 SW08 Horse power set up : Match to set up contents of P.C. board before replacement.
Jumper set up
1 Match to the set up contents of P.C. board before replacement except for J15, J16 and J17.
2. J15, J16, J17 : For the following models, set up the jumper(s) according to the table.
O : Provided (Original), X : None (cut)
Service P.C. board part name : <MCC-1361>
CM02C04S
SN 4316V164