Toshiba GRZ100 B Series, Инструкция по эксплуатации

Страница: 196 / 447

⎯
195
⎯
6 F 2 S 0 8 4 6
1
T R I P 0 = f O f 1 = O n
1 O C P - S
0 = O f f 1 = O n
1 / 5
/ 4 S c h e m e s w i t c h
1 O C P - G
0 = O f f 1 = O n
1 U V P - S
0 = O f f 1 = O n
1 U V P - G 0 = O f f 1 = O n
•
Enter 1 to use as a starter.
•
Press 3 (= Binary signal) on the "Disturbance record" screen to display the "Binary signal"
screen.
S I G 4 ( 0 - 3 0 7 1 ) : 4
S I G 3 ( 0 - 3 0 7 1 ) : 3
S I G 2 ( 0 - 3 0 7 1 ) : 2
/ ４ B i n a r y s i g n a l 1 / 3 2
S I G 1 ( 0 - 3 0 7 1 ) : 1 _
S I G 3 2 ( 0 - 3 0 7 1 ) : 0
•
Enter the signal number to record binary signals in Appendix B. It is recommended that this
setting can be performed by RSM100 because the signal name cannot be entered by LCD screen.
(Refer to Section 3.4.3.)
Setting the automatic testing
•
Press 4 (= Automatic test interval) to display the "Automatic test interval" screen.
/ 3 A u t o m a t i c t e s t i n t e r v a l 1 / 1
C h a n n ( 1 - 2 4 ) : 1 2 _ h r s
•
Enter the test intervals of the signal channel.
4.2.6.6 Status
To set the status display described in Section 4.2.4, do the following.
•
Press 5 (= Status) on the "Setting (change)" sub-menu to display the "Status" screen.
3 = T i m e z o n e
2 = T i m e s y n c h r o n i z a t i o n
/ 2 S t a t u s
1 = M e t e r i n g
Setting the metering
•
Press 1 (= Metering) to display the "Metering" screen.
/ 3 M e t e r i n g 1 / 3
P o w e r ( P / Q ) 1 = S e n d 2 = R e c e i v e
1
C u r r e n t 1 = L a g
2 = L e a d 1
D i s p l a y v a l u e 1 = P r i m a r y 2 = S e c o n r y d a 1
•
Enter the selected number and press the ENTER key. Repeat this for all items.