Toshiba GRZ100 B Series, Инструкция по эксплуатации

Страница: 181 / 447

⎯
180
⎯
6 F 2 S 0 8 4 6
2 = C l e a r
/ 2
r e c o r
i s u D t r b a n c e
d
1 =
a
i s l D p
y
•
Select 1 (= Display) to display the date and time of the disturbance records from the top in
new-to-old sequence.
/ 3 D i s t u r b a n c e r e c o r d 3 /12
# 1 1 6 / O c t / 1 9 9 7 1 8 : 1 3 : 5 7 . 0 3 1
# 2 2 0 / S e p / 1 9 9 7 1 5 : 2 9 : 2 2 . 4 6 3
# 3 0 4 / J u l / 1 9 9 7 1 1 : 5 4 : 5 3 . 9 7 7
The lines which are not displayed in the window can be displayed by pressing the and keys.
To clear disturbance records, do the following:
•
Open the "Record" sub-menu.
•
Select 3 (=Disturbance record) to display the "Disturbance record" screen.
•
Select 2 (= Clear) to display the following confirmation screen.
/ 2 D i s t u r b a n c e r e c o r d
C l e a r a l l d i s t u r b a n c e r e c o r d s ?
E N T E R = Y e s C A N C E L = N o
•
Press the ENTER (= Yes) key to clear all the disturbance records stored in non-volatile
memory.
4.2.3.4 Displaying Automatic Test
The "Automatic test" screens show the cumulative number of times the automatic test has been
carried out(*) and the automatic test interval(**).
(*) The manual tests described in Section 4.2.7.2 are also added to these counts.
(**) For setting the test interval, see Section 4.2.6.5.
The telecommunication channel test is carried out in all the GRZ100 models when BOP command
protection is selected.
The test count and test interval can be displayed or the test count can be reset to zero as follows.
To display the count and interval of the telecommunication channel test on the LCD, do
the following:
•
Select 1 (= Record) on the top "MENU" screen to display the "Record" screen.
•
Select 4 (= Automatic test) to display the "Automatic test" screen.
/ 2 A u t o m a t i c e t s t
1 = T e l e c o m m c h a n n e l t e s t
•
Select 1 (= Telecomm channel test) to display the "Telecomm channel test" screen.