Toshiba GRZ100 B Series, Инструкция по эксплуатации, Страница: 184 / 447

⎯
183
⎯
6 F 2 S 0 8 4 6
4.2.4.2 Displaying the Status of Binary Inputs and Outputs
To display the binary input and output status, do the following:
•
Select 2 (= Status) on the top "MENU" screen to display the "Status" screen.
•
Select 2 (= Binary I/O) to display the binary input and output status.
/ 2 B i n a r y i n p u t & o u t p u t 3 / 8
I n p u t ( I
O
# 1 [ 0 0 0 0 0 0 0 0 0 0 0 0 ]
I n p u t ( I
O
# 2 [ 0 0 0 ]
O u t p u t ( I
O
1 - t r i p ) [ 0 0 0 0 0 0 ]
O u t p u t ( I
O
# 3 [ 0 0 0 0 0 0 0 0 0 0 ]
O u t p u t ( I
O
# 4 [ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ]
)
)
O u t p u t ( I
O
# 2 [ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ]
I n p u t ( I
O
# 3 [ 0 0 0 0 0 0 0 0 0 0 ] )
)
)
)
#
I n p u t ( I
O
# 4 [ 0 0 0 ] )
The display format is shown below.
[
„ „ „ „ „ „ „ „ „ „ „ „ „ „ „
]
Input (IO#1) BI1 BI2 BI3 BI4 BI5 BI6 BI7 BI8 BI9 BI10 BI11 BI12 — — —
Input (IO#2) BI16 BI17 BI18 — — — — — — — — — — — —
Input (IO#3) BI19 BI20 BI21 BI22 BI23 BI24 BI25 BI26 BI27 BI28 — — — — —
Input (IO#4) BI34 BI35 BI36 — — — — — — — — — — — —
Output (IO#1-trip) TPA1 TPB1 TPC1 TPA2 TPB2 TPC2 — — — — — — — — —
Output
(IO#2) BO1 BO2 BO3 BO4 BO5 BO6 BO7 BO8 BO9 BO10 BO11 BO12 FAIL BO13 —
Output (IO#3) BO1 BO2 BO3 BO4 BO5 BO6 BO7 BO8 BO9 BO10 — — — — —
Output (IO#4) BO1 BO2 BO3 BO4 BO5 BO6 BO7 BO8 BO9 BO10 BO11 BO12 BO13 BO14 —
Lines 1 to 4 show the binary input status. BI1 to BI36 correspond to each binary input signal. For
the binary input signals, see Appendix G. The status is expressed with logical level "1" or "0" at
the photo-coupler output circuit. IO#1 to IO#4 in the table indicate the name of the module
containing the binary input circuits.
Lines 5 to 8 show the binary output status. TPA1 to TPC2 of line 4 correspond to the tripping
command outputs. FAIL of line 6 correspond to the relay failure output. Other outputs expressed
with BO1 to BO14 are configurable. The status of these outputs is expressed with logical level "1"
or "0" at the input circuit of the output relay driver. That is, the output relay is energized when the
status is "1".
IO#1 to IO#4 in the table indicate the names of the module containing the binary output relays.
To display all the lines, press the and keys.
4.2.4.3 Displaying the Status of Measuring Elements
To display the status of measuring elements on the LCD, do the following:
•
Select 2 (= Status) on the top "MENU" screen to display the "Status" screen.
•
Select 3 (= Relay element) to display the status of the relay elements.