Toshiba GRZ100 B Series, Инструкция по эксплуатации

Страница: 191 / 447

⎯
190
⎯
6 F 2 S 0 8 4 6
or press the CANCEL key to correct or cancel the entries. In the latter case, the screen turns
back to the setting screen to enable reentries. Press the CANCEL key to cancel entries made
so far and to turn to the "Setting (change)" sub-menu.
4.2.6.2 Password
For the sake of security of setting changes, password protection can be set as follows;
•
Press 4 (= Setting (change)) on the main "MENU" screen to display the "Setting (change)"
screen.
/ 1 S e t t i n g
1 = P a s s w o r d
( c h a n g ) e
2 = D e s c r i p t i o n 3 = C o m m
4 = R e c o r d
7 = B i n a r y
i
5 = S t a t u s
6 = P r o t e c t i o n
n p u t 8 = B i n a y r t o u t p u
9 = L E D
.
•
Press 1 (= Password) to display the "Password" screen.
/ 2 P a s s w o r d
1 = S e t t i n g
2 = T e s t
•
Press 1 (= Setting) to set the password for the setting change.
/ 2 P a s s w o r d
I n p u t n e w p a s s w o r d [ ]
R e t y p e n e w p a s s w o r d [ ]
•
Enter a 4-digit number within the brackets of "Input new password" and press the ENTER
key.
•
For confirmation, enter the same 4-digit number in the brackets of "Retype new password" and
press the ENTER key.
•
Press the END key to display the confirmation screen. If the retyped number is different
from that first entered, the following message is displayed on the bottom of the "Password"
screen before returning to the upper screen.
"Mismatch-password unchanged"
Reentry is then requested.
•
Press 2 (= Test) on the "Password" screen to set the password for the test.
/ 2 T e s t
I n p u t n e w p a s s w o r d [ ]
R e t y p e n e w p a s s w o r d [ ]
Set the password the same manner as that of the "Setting" above.
Password trap
After the password has been set, the password must be entered in order to enter the setting change
screens.