Toro Sand Pro 2040Z, Руководство оператора

Страница: 40 / 60

Fuel System
Maintenance
Replacing the Carbon-Canister
Filter
Service Interval: Every 200 hours
1. Remove the fasteners securing the seat assembly to the
machine.
G023891
1
2
3
Figure 46
1. Seat assembly 3. Washer (4)
2. Bolt (4)
2. Disconnect the filter from the carbon canister ( Figure
47 ).
1
G023990
Figure 47
1. Carbon-canister filter
3. Connect the new filter to the carbon canister.
4. Install the seat support plate and the seat.
Replacing the Fuel Filter
Service Interval: Every 800 hours
The fuel line has an in-line filter. Replace it as follows:
1. Loosen the hose clamp on the carburetor side of the
filter, and remove the fuel line from the filter (
Figure
48 and Figure 49 ).
1
G023448
Figure 48
1. Fuel filter
G008963
1 2
3
Figure 49
1. Fuel filter 3. Fuel line
2. Hose clamp (2)
2. Place a drain pan under the filter, loosen the remaining
hose clamp, and remove the filter.
3. Slide the hose clamps onto the ends of the fuel lines.
4. Push the fuel lines onto the new fuel filter, and secure
them with the hose clamps.
40