Toro Sand Pro 2040Z, Руководство оператора

Страница: 36 / 60

G023437
Figure 36
•
Attachment lift (4)— Figure 37
G023438
Figure 37
Engine Maintenance
Servicing the Engine Oil and
Filter
Changing the Engine Oil
Service Interval: After the first 8 hours—Change the engine
oil.
Every 100 hours—Change the engine oil (more often
in extremely dusty or dirty operating conditions).
Toro Premium Engine Oil is available from your Authorized
Toro Distributor.
Crankcase Capacity: 1.66 L (1.75 US qt) with filter change
Use 4-cycle engine oil that meets or exceeds the following
requirements:
•
API service category: SJ, SL, SM, or higher
•
Viscosity: SAE 30; refer to the following chart for other
viscosities ( Figure 38 ):
Important:
Using multi-viscosity oils, such as
10W-30, increases oil consumption. Check the oil
level more frequently when using them.
G023445
-20 0 20 40 60 80 100 F
-30 -20 -10 0 10 20 30 40 C
o
o
S AE 30
S AE 5W-20
S AE 10W-30 / S AE 10W-40
S AE 40
Figure 38
1. Run the engine for a few minutes to warm the oil.
2. Park the machine on a level surface, stop the engine, set
the parking brake, and remove the key.
3. Remove the drain plug ( Figure 40 ) and let the oil drain
into a suitable container. When the oil stops draining,
install the drain plug.
Note:
Insert a piece of paper or light cardboard into
the drain hole to channel the oil away from the engine
mounting plate (
Figure 39 ).
36