Toro Sand Pro 2040Z, Руководство оператора

Страница: 16 / 60

5
Applying the CE Warning
Decal
Model 08706TC Only
Parts needed for this procedure:
1 Warning decal (130-1851)
Procedure
If this machine must be CE compliant (Europe), apply the
CE warning decal (130-1851) over the existing warning decal
(127-0363).
6
Applying the CE Service Decal
Model 08706TC Only
Parts needed for this procedure:
1 Service decal (130-2620)
Procedure
If this machine must be CE compliant (Europe), apply the
CE service decal (130-2620) over the existing service decal
(127–0371).
7
Installing the ROPS
Model 08706TC Only
Parts needed for this procedure:
1 Roll bar
4 Bolt
4 Flange locknut
4 Spring washer
2 Bracket
Procedure
For Model 08706TC, install the ROPS as follows:
Note:
Model 08706 has the ROPS installed at the factory.
1. Remove the roll bar from the crate.
2. Place the roll bar on the machine as shown in Figure 6 .
Figure 6
1. Roll bar 4. Bracket (2)
2. Bolt (4) 5. Flange locknut (4)
3. Spring washer (4)
3. Install the brackets on the frame of the machine.
16