Toro Sand Pro 2040Z, Руководство оператора

Страница: 53 / 60

1
G023455
Figure 73
1. Top plugs
15. Start and run the engine. Operate the lift cylinder until
it extends and retracts.
16. Check to ensure that the machine can drive forward
and backward.
17. Stop the engine and check the fluid level in reservoir,
add fluid if necessary.
18. Check the connections for leaks, and ensure that the
hydraulic system works properly; refer to
Checking the
Hydraulic System (page 51) .
19. Dispose of the used fluid properly.
Checking the Hydraulic Lines
and Hoses
Service Interval: Before each use or daily
Check the hydraulic lines and hoses daily for leaks, kinked
lines, loose mounting supports, wear, loose fittings, weather
deterioration, and chemical deterioration. Make all necessary
repairs before operating.
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin. Fluid injected into the skin must be
surgically removed within a few hours by a doctor
familiar with this form of injury, or gangrene may
result.
• Make sure that all hydraulic-fluid hoses and
lines are in good condition and all hydraulic
connections and fittings are tight before
applying pressure to the hydraulic system.
• Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure
hydraulic fluid.
• Use cardboard or paper to find hydraulic leaks;
never use your hands.
• Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
• Seek immediate medical attention if fluid is
injected into skin.
53