Topcon RD-80SA, Инструкция по эксплуатации

Страница: 45 / 70

43
FX_# Sets measurement range for X2 filter in [RANGE EACH]
Valid value range
：
1 - 8
FY_# Sets measurement range for Y filter in [RANGE EACH]
Valid value range
：
1
– 8
FZ_# Sets measurement range for Z filter in [RANGE EACH]
Valid value range
：
1 - 8
MF_# Selects filter
0
：
OPEN 1
：
X2 filter 2
：
Y filter
3
：
Z filter 4
：
X2,Y,Z filter
FS_# Specifies the correction factor number to be enabled.
Valid value range
：
0 - 10
※
0:correction fact is disabled
FG Reads current correction factor number.
WF_#_####_####_#### Enters correction factor data.
Valid value range
：
Correction factor number
：
1 -10
Correction factor
：
0.01
– 100.0
RF_# Reads correction factor data in specifying correction
factor number
Valid value range
：
1 - 10
CF_# Initializes specifying correction factor.
When specify
“0”, All correction factor data are initialized.
Valid value range
：
0 - 10
BR_# Sets communication speed in RS-232C
0
：
9600 1
：
19200 2
：
38400
DM_# Sets delimiter in RS-232C
0
：
CR+LF 1
：
CR
LIS_###.###.###.### Sets IP address in LAN
Setting takes active after restart the instrument.
Valid value range
：
192.168.100.1 - 192.168.255.255
LIG Reads LAN IP address.
LMS_###.###.###.### Sets sub net mask in LAN
Setting takes active after restart the instrument.
Valid value range
：
255.255.0.0 - 255.255.255.255
LMG Reads sub net mask in LAN
LPS_##### Sets LAN port number
Setting takes active after restart the instrument.
Valid value range
：
49152 - 65535
LPG Reads LAN port number
PMT Sets sensitivity mode of photo detector
0
：
INITIAL 1
：
USER
ERR Reads latest error number.
”
_
” means Space. “#” means numerical values.
Delimiter CR
：
0x0d
、
LF
：
0x0a