40
3.2.7
RS-232C Parameter
Set Communication parameter in RS-232C
The procedure for setting is as follows;
1
Press [CHANGE] switch.
The cursor on [BAUD RATE] data blinks and be able to change data.
2
Press [ROTATION] switch to select setting.
Each time pressing [ROTATION] switch, options are changed as follows;
BAUD RATE
：
38400→9600→19200→38400…
DELIMITER
：
CRLF
→CR→CRLF…
3
Press
[SHIFT] switch to move next line.
4
After selecting, Press
[ENTER] switch.
Be sure to turn off once after changing interface parameter.
3.2.8
Auto calibration
Set on or off auto calibration of photo detector.
The procedure for setting is as follows;
1
Press [CHANGE] switch
2
Press [ROTATION] switch to select On or Off.
Each time pressing the switch,
[
ON/OFF]
on the screen is changed
3
After setting , Press
[ENTER] switch.
Auto calibration ON: Calibration is conducted automatically in the following occasions;
After warm-up, Before measurement, After 1000 times measurement in local mode.
Auto calibration OFF: It may lead to low accuracy of measured data, and thus it is
recommended that Auto calibration is set to ON.
＊ＲＳ－２３２Ｃ ＰＡＲＡＭＥＴＥＲＳ＊
ＢＡＵＤ ＲＡＴＥ＝３８４００
ＤＥＬＩＭＩＴＥＲ＝ＣＲＬＦ
Memo
＊
ＡＵＴＯ ＣＡＬＩＢＲＡＴＩＯＮ ＊
ＯＮ
Memo
Содержание RD-80SA
Страница 1: ...Instruction Manual Luminance Colorimeter Rev 6...
Страница 2: ......
