Topcon RD-80SA, Инструкция по эксплуатации

Страница: 24 / 70

22
When analogue output voltage rise to the over range level, the over range error occur.
When analogue output voltage fall down to the under range level, the under range error occur
■
Usage
The procedure of use analogue output
1
Connect dedicated BNC cable to the RD-80SA.
2 Press [RUN/HOLD] switch to start measurement.
Analogue output voltage is provided during RUN status.

Notice
・
When over range error occur, the instrument cannot provide accurate data. Be
sure to set appropriate measurement range.
・
Impedance :
100Ω or less
Memo
Time
ｔ
Output voltage[V] (A/D cont
）
）
0(0)
3.5(65535)
Over range level
Under range level
Analogue output signal
Adjustable range of the
over range level.
2.0
Ｖ
- 3.4V
Default 3.3V
Adjustable range of
the under range level
0
Ｖ
- 1.2V
Default 0.03V