Topcon RD-80SA, Инструкция по эксплуатации

Страница: 38 / 70

36
Measured data of object
8 Press [ENTER] switch to return Correction factor menu screen.
3.2.4.3 Check and set of correction factor
Entered correction factor shows. When correction factor is not entered, the RD-80SA shows [NO
DATA]. [SET] appears on the screen in applied correction factor.
No correction factor entry
Correction factor data
Applied correction factor
Press [CHANGE] switch to determine or cancel.
Details of items
K01
：
Correction factor Number. The RD-80SA can record ten correction factor data.
K01 - K10
NO DATA
：
When no correction factor is entered, this message appear.
KX / KY / KZ
：
Correction factor in Tristimulus values.
C=SET
：
[CHANGE] switch
＝
SET
Press [CHANGE] switch to apply the value on the screen to correction factor.
[SET] appears on the screen in applied correction factor.
R=NEXT
：
[ROTATION] switch
＝
NEXT
Another correction factor appears.
S=PAGE
：
[SHIFT] switch
＝
PAGE
Each time pressing [SHIFT] switch, screen change as follows;
Reference data
→ Measured data → Correction factor data → Reference data
ＳＭＰ０１ ｘ＝ ０．４４６４
ｙ＝ ０．４０７５
Ｌ＝ ９．９８０Ｅ＋０１
Ｒ＝ＮＥＸＴ Ｓ＝ＰＡＧＥ
Ｋ０１ ＫＸ＝ １．０００Ｅ+００
ＫＹ＝ １．０００Ｅ+００
ＫＺ＝ １．０００Ｅ+００
Ｃ＝ＳＥＴ Ｒ＝ＮＥＸＴ Ｓ＝ＰＡＧＥ
Ｋ０１
ＮＯ ＤＡＴＡ
Ｒ＝ＮＥＸＴ Ｓ＝ＰＡＧＥ
Ｋ０１ ＫＸ＝ １．０００Ｅ+００
ＳＥＴ ＫＹ＝ １．０００Ｅ+００
ＫＺ＝ １．０００Ｅ+００
Ｃ＝ＳＥＴ Ｒ＝ＮＥＸＴ Ｓ＝ＰＡＧＥ