Topcon RD-80SA, Инструкция по эксплуатации

Страница: 41 / 70

39
3.2.5 Sensitivity mode
Adjusts the sensitivity of the photo detector
INITIAL
：
Default setting
USER
：
Set the sensitivity to designated value
☞
「
3.1.2 Setting Menu / Confirm setting data
」
The procedure for operation is as follows
1 Press [CHANGE] switch
2 Press [ROTATION] switch to select from [INITIAL] and [USER]
Each time you press the switch, change [INITIAL] and [USER]
3 After selecting, Press [ENTER] switch
3.2.6 LAN Parameter
Set LAN interface parameter
The procedure for setting is as follows;
1 Press [CHANGE] switch.
The cursor on the [IP] line will blink and able to enter the data.
2 Press [ROTATION] switch and change the data each digit. Each time pressing, the figure
will be changed as below; Press [SHIFT] switch to move the cursor to next digit.
.→ 0 → 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9
･ ･ ･ ･
3 After setting, press [ENTER] switch to move to next line
4 After completing of entry, Press [ENTER] switch.
Be sure to turn off once after change the Interface parameter.
＊ ＰＭＴ ＳＥＮＳ ＊
ＩＮＩＴＩＡＬ
＊ ＬＡＮ ＰＡＲＡＭＥＴＥＲＳ ＊
ＩＰ ＝１９２．１６８．１００．１
ＭＡＳＫ ＝２５５．２５５．０．０
ＰＯＲＴ ＝５００００
Memo