TLV EF200F-C, Инструкция по эксплуатации

Страница: 79 / 181

EF200F-C Commissioning
79
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign pulse output 1 The Pulse option is selected in
the Operating mode
parameter parameter. Select process variable for
pulse output. • Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Total mass flow
*
• Energy flow
*
• Heat flow
difference
*
Volume flow
Value per pulse The Pulse option is selected in
the Operating mode
parameter and a
process variable is selected in
the Assign pulse output
parameter. Enter measured value at which
a pulse is output. Positive floating
point number Depends on country
and nominal
diameter
Pulse width The Pulse option is selected in
the Operating mode
parameter and a
process variable is selected in
the Assign pulse output
parameter. Define time width of the
output pulse. 5 to 2 000 ms 100 ms
Failure mode The Pulse option is selected in
the Operating mode
parameter and a process
variable is selected in the
Assign pulse output
parameter . Define output behavior in
alarm condition. • Actual value
• No pulses No pulses
Invert output signal ‒ Invert the output signal. • No
• Yes No
* Visibility depends on order options or device settings
Configuring the frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
Pulse/frequency/switch output
Assign frequency output
Minimum frequency value
Maximum frequency value
Measuring value at minimum
frequency
Measuring value at maximum
frequency