TLV EF200F-C, Инструкция по эксплуатации

Страница: 105 / 181

EF200F-C Commissioning
105
Diagnostic event category
Diagnostic event simulation
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign simulation process variable ‒ Select a process variable for
the simulation process that is
activated. • Off
• Mass flow
• Flow velocity
• Volume flow
• Corrected volume
flow
• Temperature
• Calculated
saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Condensate mass
flow
*
• Energy flow
• Heat flow
difference
*
• Reynolds number
Off
Process variable value A process variable is selected
in the Assign simulation
process variable parameter. Enter the simulation value for
the selected process variable. Depends on the
process variable
selected 0
Current input 1 simulation ‒ Switch simulation of the
current input on and off. • Off
• On Off
Value current input 1 In the Current input
simulation parameter, the On
option is selected. Enter the current value for
simulation. 3.59 to 22.5 mA 3.59 mA
Current output 1 to n simulation ‒ Switch the simulation of the
current output on and off. • Off
• On Off
Value current output 1 to n In the Current output 1 to n
simulation parameter, the On
option is selected. Enter the current value for
simulation. 3.59 to 22.5 mA 3.59 mA
Frequency output simulation In the Operating mode
parameter, the Frequency
option is selected. Switch the simulation of the
frequency output on and off. • Off
• On Off
Frequency value In the Frequency output
simulation parameter, the On
option is selected. Enter the frequency value for
the simulation. 0.0 to 1 250.0 Hz 0.0 Hz
Pulse output simulation In the Operating mode
parameter, the Pulse option is
selected. Set and switch off the pulse
output simulation.
For Fixed value option:
Pulse width parameter
(→ See 10.4.6) defines the
pulse width of the pulses
output.
• Off
• Fixed value
• Down-counting
value
Off
Pulse value In the Pulse output
simulation parameter,
the Down-counting value
option is selected. Enter the number of pulses for
simulation. 0 to 65 535 0