TLV EF200F-C, Инструкция по эксплуатации

Страница: 116 / 181

Operation EF200F-C
116
Parameter overview with brief description
Parameter Prerequisite Description User interface
Volume flow ‒ Displays the volume flow that is
currently measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→ See 10.4.2).
Signed floating-point
number
Corrected volume flow ‒ Displays the corrected volume flow
that is currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→ See 10.4.2).
Signed floating-point
number
Mass flow ‒ Displays the mass flow currently
calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→ See 10.4.2).
Signed floating-point
number
Flow velocity ‒ Displays the flow velocity that is
currently calculated.
Dependency
The unit is taken from the Velocity
unit parameter (→ See 10.4.2).
Signed floating-point
number
Temperature ‒ Displays the temperature that is
currently measured.
Dependency
The unit is taken from the
Temperature unit parameter
(→ See 10.4.2).
Signed floating-point
number
Calculated saturated steam pressure • The Steam option is selected in the
Select medium parameter
(→ See 10.4.3).
Displays the saturated steam pressure
that is currently calculated.
Dependency
The unit is taken from the Pressure
unit parameter (→ See 10.4.2).
Signed floating-point
number
Steam quality • The Steam option is selected in the
Select medium parameter.
Displays the current steam quality.
Dependency
Depends on the compensation mode
of the steam quality: Steam quality
parameter (→ See 10.4.3)
Signed floating-point
number
Total mass flow The following conditions are met:
• Order code for "Application package",
option "Wet steam measurement"
• The Steam option is selected in the
Select medium parameter
(→ See 10.4.3).
Displays the total mass flow that is
currently calculated (steam and
condensate).
Dependency
The unit is taken from the Mass flow
unit parameter (→ See 10.4.2).
Signed floating-point
number
Condensate mass flow The following conditions are met:
• Order code for "Application package",
option "Wet steam measurement"
• The Steam option is selected in the
Select medium parameter
(→ See 10.4.3).
Displays the condensate mass flow that
is currently calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→ See 10.4.2).
Signed floating-point
number