Thermo Scientific Vanquish VH-P10-A-02, Руководство по эксплуатации

Страница: 62 / 238

5 • Installation
Page 62 Vanquish Pumps (VH-P10-A-02) Operating Manual
5.6.3 Connecting Fittings, Capillaries, and Tubing
This section provides information about how to connect and handle
capillaries, fittings, and tubing.
5.6.3.1
General Guidelines
When connecting capillaries and tubing, follow these general
recommendations:
•
Use only the capillaries and tubing (for example, solvent lines or
waste tubing) that are shipped with the pump or additional or spare
capillaries and tubing as recommended by Thermo Fisher Scientific.
•
The connectors must be free from contaminants. Even minute
particles may cause damage to the system or lead to invalid test
results.
• Do not install capillaries or tubes that are stressed, nicked, kinked, or
otherwise damaged.
• Install capillaries and fittings only at the positions for which they are
intended.
5.6.3.2
Connecting Viper Capillaries
This section describes how to connect Viper™ capillaries. All Viper flow
connections in the Vanquish system are designed to be finger-tight.
To connect Viper capillaries with knurl, follow these steps:
NOTICE
• Tighten or loosen Viper capillaries
only
with your fingers. Do not use
tools other than the knurl that comes with the capillary.
• To avoid damage to the capillary or connection, tighten and loosen
the Viper connections
only
when the system pressure is down to
zero.