Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 98 / 214

Chapter 8 Site Info
8-2
General Comments
1. There may have up to 50 sites in the analyzer memory at one time.
2. When downloading or printing site data, select either a single site, all sites, or
current site.
3. Selection # 2 (enter site information) under the site menu allows the entering of
notes about the data to be logged. For example, notes could indicate the
conditions at the time of monitoring ("cloudy"), or who requested that the
monitoring the be done ("I.H. survey"). This information will appear at the end of
the standard logging report. The default setup provides 20 note locations, each of
which may be up to 12 characters long.
4. To clear all sites and logged data, select # 5 (Report/Data) from the main menu,
then select # 4 (Memory Clear). Select # 1 from the memory menu to clear the
sites and logged data (see Memory Clear Display, below). See "Locations" for
clearing all locations.
┌────────────────────────────────────────┐
│╒════════ SUMMARY ════════╕ MEMORY MENU │
││ Site: <all> │ 1=Clear logged │
││ │ sites & data │
││ Locations: --- │ │
││ │ 2=Clear all: │
││ │ -logged data │
││ Memory: 94% free │ -locations │
│└───────────────────────┘ -report defin │
└────────────────────────────────────────┘
Memory Menu Display
LOCATIONS
Locations are reusable identifiers that may be used to identify data within a site. For
example, if monitoring homes, the locations "kitchen", "hall", "bedroom", "living" and
"dining" can be established. When entering the first home, an appropriate site name (i.e.,
"123 Main St") and the logging parameters can be established. Then scroll through the
five locations and log the data for the appropriate room(s). When moving to the next
home, a new site ("987 Oak Lane") would be established, and the process would be
repeated. There are three types of locations:
1. Standard Locations - These are "permanent" locations that are entered into the
analyzer's memory and may be used in all sites. The locations in this list become
the active location list when the location feature is activated and a new site is
created. The location list is created on a PC and sent to the analyzer. To create a
location file, download the blank location list from the analyzer to be used as a
template. The spacing in the file is critical; if improperly formatted, an error
message will appear during the data transfer to the analyzer. To ensure correct
spacing, position the cursor after the placeholder "<none>", backspace to the "="
sign, and enter the desired location (up to 12 characters long). To enter a second
location, copy the current line and paste it to a new line. Modify this new line as